IDTECK Star FINGER006, User Manual

Page: 29 / 51

29
12.1.6. MASTER ID REGISTRATION
12.1.7. SYSTEM INITIALIZATION
6. MASTER ID
ENTER ID NO.
-> 12345678
Master ID is the number/card that you use to enter the Setup
Mode. For security reasons, it is advisable that you change
the default Master ID immediately and keep the new Master
ID / card confidential.
CAUTION: Beware that if you forget the Master ID, you
cannot access the Setup Mode.
To change the Master ID, press <ENT>, and then either enter
the desired 8Digit Master ID or present a card to the reader.
NOTE: For the FINGER006SR, the Master ID is 10Digits long
in the range of 0000000000 to 4294967295.
On the next screen, enter the desired 4Digit Master Password
in the PW field and, in the FP field, enter
<0> if you wish to
access Setup Mode without master fingerprint verification or
<1> if you wish to use master fingerprint, in which case you
will be asked to place your fingerprint on the scanner twice in
the next step. When the Master ID/card registration is
successfully completed, the LCD displays the “REGISTRATION
OK” message.
ID: 12345678
PW: FP:
TO REGISTER F/P
PUT YOUR FINGER!
REGISTRATION OK!
NOTE: The default Master ID for FINGER006/P and IP-FINGER006 is 00000000 (Eight zeros),
but for the FINGER0006SR, it is 0000000000 (Ten zeros).
System initialization allows you to initialize the FINGER006.
Initialization clears all the user-defined data stored in the
device such as card data, input/output setting, Time
Schedules, etc.
CAUTION : Prior to system initialization, make sure to check
whether or not the data stored in the device is not needed,
since it will be deleted after the initialization.
To initialize the FINGER006, press <ENT>, and then press
<1> to confirm. If you wish to cancel and exit without
initialization, press <0> instead.
7. SYSTEM INIT.
7. SYSTEM INIT.
1 – YES, 0 - NO
WAITING ! !