IDTECK Star FINGER006, User Manual

Page: 9 / 51

9
5. Identifying Supplied Parts
Please unpack and check the contents of the box.
Main unit Wall mount O-ring User’s manual Screws Cable & Diode
(1 Unit) (1 PC) (5 PCS) (1 Copy) (4 PCS) Cable(5 ea)
Diode(2 ea)
6. Product Overview
6.1. Functions
Operation with the Host Computer
ID data transactions can be managed via the host computer. The data transmitted from
the controller can be displayed and stored on the host PC.
Data Backup
The controller retains all user information and event data, even in the case of
power failure.
Keypad Registration
The built-in keypad and the LCD screen let you perform manual programming without a
PC connected.
Dual Finger Mode
Dual Finger Mode is a function that lets a user register two fingers for one ID so that the
user can receive authentication with either of the two registered fingers. This is useful
when a user’s finger is injured.
1:N Identification
A user can gain authentication using the fingerprint alone without RF card or PIN. You can
set this function through the <TYPE SELECTION> in SETUP MENU F1. In the
IDENTIFICATION MODE, the security level is automatically increased and it causes
FRR(False Rejection Ratio) to get higher, which may result in reduction of successful