IDTECK Star FINGER006, User Manual

Page: 27 / 51

27
12.1.1. TIME SETTING
12.1.2. COMMUNICATION ADDRESS
12.1.3. BAUD RATE
The LCD displays the current time. To change the time, press
<ENT> , enter 15 Digits in a “YYYYMMDDhmmssW” format,
and then enter <ENT> again to confirm.
NOTE: For the days of the week (W),
1 : Sun, 2 : Mon, 3 : Tue, 4 : Wed, 5 : Thu, 6 : Fri, 7 : Sat.
e.g. To input August 24, 2009, 13:30:15, Monday,
enter 200908241330152.
1. TIME SETTING
MM/DD hh:mm:ss
YYYYMMDDhhmmssW
A communication address is a unique number assigned to
each device for communication. The default address is 033.
For proper communication with the PC, it is important that the
value you set here should match the value you set on the
application software. It is also important to make sure each
device on a loop has a unique address.
To change the communication address of the FINGER006,
press
<ENT> , enter the desired 3-Digit address in the 000-
255 range, and then press <ENT> again to confirm.
2. COMM ADDRESS
033
2. COMM ADDRESS
12
Baud Rate is the measurement of the serial communication
speed.. As with the communication address, the baud rate
you set here should match the value you set on the software.
Baud Rates of 4800bps, 9600bps, 19200bps, 38400bps,
57600bps and 115200bps are supported, and 9600bps is
recommended.
To change the Baud Rate, press
<ENT> , select the desired
baud rate by pressing <4> or <6>, and then press <ENT>
again to confirm.
NOTE: If a TCP/IP module is being used, the Baud Rate
setting must be set the same as the TCP/IP module setting.
3. BAUD RATE
9600
3. BAUD RATE
->9600