TURBOCAR
Use of the
Machine
5
0.0 19/21
USE
O
F
T
H
E
M
A
CHI
N
E
PAY ATTENTION DURING ROTATION OF THE TURBOCAR TO ENSURE THE QUICK
COUPLING PIPES (IF ANY), DO NOT GET ENTANGLED OR HOOKED INTO PARTS OR
COMPONENTS OF THE MACHINE, CAUSING THEM TO BREAK;
5) lower the drawbar lifter foot/feet and the wheels (lift the machine) in order to be able to hitch
the machine to the tractor; in this operation it is required to:
a) lift the turbocar, lowering the wheels and the drawbar lifter foot or feet, using the
distributor lever (B) after connecting it to the hydraulic system (through quick
couplings to the tractor or through a diesel or petrol engine etc.) in order to be able
to connect the machine to the tractor (fig. 5.4.6);
(fig. 5.4.6)
b) if present, connect the lights bar and braking systems to the tractor;
The machine is now ready to be hitched to the tractor (fig. 5.4.6).
If the compressor is fitted on the machine (optional feature in some machine models) and you
wish to partially empty the PE hose from water, this operation must be performed before hitching
the machine to the tractor;
The compressor kit (fig. 5.4.7) consists of:
-
compressor (I);
-
system (L) consisting of rubber hose with fitting and check valve (as an alternative
it is possible to have a rigid iron system);
(fig. 5.4.7)
BEFORE STARTING THE COMPRESSOR CAREFULLY READ THE USER AND
MAINTENANCE MANUAL PROVIDED WITH IT;
IT IS FORBIDDEN TO START UP THE PTO BEFORE COMPLETING AND CHECKING
INSTALLATION OF THE COMPRESSOR;