TURBOCAR
Use of the
Machine
5
0.0
2/21
USE
O
F
T
H
E
M
A
CHI
N
E
During preparation of the turbocar, the following points must be adhered to:
1) move the machine to the place where it is to be parked for irrigation; when
choosing the placement it is required to ensure that:
-
the ground on which the turbocar is placed is sufficiently firm;
-
the ground on which the turbocar is placed is sufficiently level;
-
there is enough space around the turbocar for the operator;
2) lower the drawbar lifter foot/feet, unhitch the machine from the tractor and prepare it for
irrigation; in this operation it is required to:
a) lower the drawbar lifter foot or feet (A) (the machine is lifted) with the distributor lever
(B) after connecting it to the hydraulic system (through quick couplings to the tractor
or through a diesel or petrol engine etc.) so as to lift the machine and release it from
the tractor (fig. 5.1.1 – fig. 5.1.2);
b) if present, disconnect the lights bar and braking systems from the tractor;
(fig. 5.1.1) (fig. 5.1.2)
c) after moving the tractor a few metres from the machine, place the turbocar on the
turntable support (fig. 5.1.3), lifting the wheels and the drawbar lifter foot or feet,
using the distributor lever (B) after connecting it to the hydraulic system (through
quick couplings to the tractor or through a diesel or petrol engine etc.);
(fig. 5.1.3)
3) according to the field to be irrigated, if required, rotate the turbocar clockwise or anti-
clockwise (fig. 5.1.4), by carefully using the distributor lever (B) (fig. 5.1.2) after connecting
it to the hydraulic system (through quick couplings to the tractor or through a diesel or petrol
engine etc.);
(fig. 5.1.4)