TURBOCAR
Installation
4
0.0 16/22
INST
AL
L
AT
IO
N
In this stage the hose is connected to the flange of the irrigator trolley. To do so:
1) fix the flange of the limit stop slide (EA) with the flange of the trolley (FA) (only
lower screws) (fig. 4.5.34);
2) insert gasket (fig. 4.5.35);
3) tighten the remaining upper screws and block all screws;
(fig. 4.5.34)
(fig. 4.5.35)
In some machine models a spacer (GA) must be mounted on the limit stop slide (EA) (fig.
4.5.36).
(fig. 4.5.36)
5.11 TROLLEY LOADER LOWERING, HOSE REELING IN, TROLLEY LOADER
ADJUSTMENT, TROLLEY HITCHING AND TROLLEY LOADER LIFTING:
In these stages the trolley is mounted on the machine, in order to be ready for the
irrigation stage:
1) Lower the trolley loader, until the spades are resting on the ground, using the levers
of the distributor (fig. 4.5.3), after connecting it to the hydraulic system (through quick
couplings to the tractor or through a diesel or petrol engine etc.);
Ensure the machine is resting on the ground on the turntable holder and possibly the
drawbar lifter foot (the wheels must not be resting on the ground).