TURBOCAR
Use of the
Machine
5
0.0
9/21
USE
O
F
T
H
E
M
A
CHI
N
E
3) place the gear release lever on “1” START. In most machines the gear is engaged by
applying force on the black knob of the lever and pushing right (fig. 5.2.21); it is very
important to ensure the position of the lever on the gearbox is “1” (fig. 5.2.22 – 5.2.23);
In larger machines, to engage the gear, however, one must pull outwards, always by means
of the black knob (fig. 5.2.24);
(fig. 5.2.21) (fig. 5.2.22)
(fig. 5.2.23)
(fig. 5.2.24)
4) set the knob on the desired gear (I, II, III or IV) with the help of the handwheel on the PTO
(fig. 5.2.25) (see paragraph 5.3.3); for larger machines the gearbox has 2 gears (I or II)
and is blocked with the appropriate pin stop (fig. 5.2.26);
(fig. 5.2.25)
(fig. 5.2.26)
5) start the pumping station at MINIMUM, so that the water gets near the machine;