TURBOCAR
Installation
4
0.0 21/22
INST
AL
L
AT
IO
N
For topping up, the battery must be filled with sulphuric acid at the density required by the
manufacturer (usually 1.27 Kg/l) up to the indicated level (about 10-15 mm above the plates,
temperature above 15°C). Wait at least 30 minutes before installation on board. During cold
periods or if storage exceeds 6 months, before charging the battery, let it “stand” and cool for at
least 3-4 hours.
8. INSTRUCTIONS FOR COMMISSIONING
Machine operator:
operator authorised to use the machine (strictly
following the manufacturer’s instructions) in compliance with the laws in
force in the machine user’s country.
Before starting up the Machine, the following operations must be performed each time:
-
Check all safety systems
-
Check guards
- C
heck signs
Before starting up the Machine, it is required to perform a series of checks and inspections in order
to prevent errors or accidents during start-up:
-
ensure the machine has not been damaged during transport and placement;
-
check with special care the integrity of the control panel, electric cables and pipes.
During preliminary operations, strictly comply with the instructions listed below.
-
in all activities performed, comply with the provisions and instructions given by one’s
employer for the purpose of collective and personal protection;
-
under any circumstances, strictly comply with the provisions of this manual, if necessary
contact the supplier or skilled personnel;
-
do not perform on one’s own initiative operations or manoeuvres that are not under one’s
responsibility or that might undermine one’s safety or that of others;
-
never wear loose clothes, rings, bracelets or chains when working near moving parts;
-
use the protective helmet to prevent impacts against sharp parts of the machine at head
height,
-
always wear safety shoes and protective overalls;
-
use protective cream for the hands or gloves because contact with certain substances
present or used might be harmful for the skin;
-
immediately replace wet overalls;
-
during adjustment operations ensure your hands and feet are always dry;
-
procure adequate and safe containers for waste oil.
4
INSTALLATION
PAR.
DESCRIPTION
8
Instructions for commissioning