TURBOCAR
Use of the
Machine
5
0.0
5/21
USE
O
F
T
H
E
M
A
CHI
N
E
-
PAYING OUT
: proceed as follows to pay out the hose:
1) connect one end of the flexible hose to the water inlet of the machine (fig. 5.2.1) while
leaving the other end free (fig. 5.2.2), possibly in a ditch next to the machine, so that the
water is able to come out for easier hose paying out (lighter), and to prevent any air bubbles
from forming inside the PE hose;
(fig. 5.2.1) (fig. 5.2.2)
ENSURE ALL FITTINGS HOOKS ARE PROPERLY INSERTED;
PAY ATTENTION TO THE CONDITION OF GASKETS;
ENSURE THE SECOND INLET OF THE WATER SYSTEM IS CLOSED WITH
THE CAP SUPPLIED (fig. 5.2.3);
(fig. 5.2.3)
IT IS RECOMMENDED TO PLACE A PROTECTION FILTER BETWEEN THE
MACHINE’S INLET AND THE HOSE, FOR ANY STONES AND DIRT THAT MIGHT
DAMAGE THE TURBINE IMPELLER (fig. 5.2.4);
(fig. 5.2.4)
2) place the gear release lever on “0” STOP, in order to prevent speed increase on the upper
axles of the gearbox and cause impeller breakdown. In most machines the gear is released
by applying force on the black knob of the lever and pushing left (fig. 5.2.5); it is very
important to ensure the position of the lever on the gearbox is “0” (fig. 5.2.6 – 5.2.7);
In larger machines, to release the gear, however, one must push towards the machine
always by means of the black knob (fig. 5.2.8);