TURBOCAR
Description
Machine
2
0.0
3/22
DESC
RI
PT
IO
N
O
F
T
HE
M
AC
HI
N
E
2.3 SAFETY DEVICES FOR PTO AND REELING IN
OUT OF STOWED POSITION
Protection cap for the PTO and the mechanical stop system, in the event the hose should come
out of the roller (bar joint).
2.4 MOTION DRIVE TO THE ROLLER VIA CROWN GEAR (DOUBLE
CROWN FOR LARGE MACHINES)
Transmission between gearbox and roller is direct via pinion keyed onto the output shaft of the
gear block and the crown gear welded onto the side of the roller (in large machines
motion transmission to the roller is not direct, but takes place via chains and a shaft,
connected to the two crown gears on the roller).
2.5 HOSE GUIDE MOVED BY WORM SCREW
“Fork” device sliding onto the worm screw (sliding bar) which arranges the PE hose evenly into
the roller.