TURBOCAR
Installation
4
0.0 18/22
INST
AL
L
AT
IO
N
IT IS IMPORTANT TO CHECK THAT, WITH MACHINE POSITIONED TO THE GROUND
(SPADES FIXED IN THE GROUND) THE LIMIT STOP SLIDE IS ABLE TO GO UNDER
THE TROLLEY LOADER, THEREFORE THE TROLLEY LOADER MUST ALWAYS BE
PROPERLY ADJUSTED (SEE PARAGRAPH 4.5.11.3) (fig. 4.5.43).
IF REQUIRED, IN ORDER TO HAVE MORE CLEARANCE, THE STROKE END OF THE
TROLLEY LOADER MUST BE ADJUSTED BY LIFTING THE SCREW (fig. 4.5.44)
(fig. 4.5.43) (fig. 4.5.44)
5) Lift the trolley loader then the trolley as well, until the spades reach the stroke end,
using the levers of the distributor (fig. 4.5.3), after connecting it to the hydraulic
system (through quick couplings to the tractor or through a diesel or petrol engine
etc.);
At this stage, also by operating the distributor levers (fig. 4.5.3), it is possible to lift the
machine on the wheels and on the drawbar, ready to be hitched to the tractor (fig.
4.5.45).
(fig. 4.5.45)