manualshive.com logo in svg

IDEAL Viscount GTE 14, Installation, Assembly And Servicing, Page: 2 / 60

Share
Download
IDEAL Viscount GTE 14 Installation, Assembly And Servicing Download Page 2

2

Ideal Viscount GTE 

- Installation, Assembly & Servicing

Contents

1.  General ........................................................................ 2

1.1  Technical Specifications of Combination Boilers .. 3
1.2  Main Dimensions .................................................. 4

2.  Installing The Boiler ................................................... 5

2.1  Boiler Location ...................................................... 5
2.2  Ventilation ............................................................. 5

3.  Assembly .................................................................... 5

4.  Hydraulic Connections .............................................. 6

4.1  Dimensional Information Required ....................... 6
4.2  Installation Recommendations ............................. 6
4.3  Filling the System ................................................. 7
4.4  Sludge Removal ................................................... 7

5.  Chimney Connection ................................................. 7

5.1  Flue Size ............................................................... 7
5.2  Connecting to the Flue ......................................... 8

6.  Assembly of Viscount GTE Boilers .......................... 9

7.  Control Panel ............................................................ 41

7.1  Standard ............................................................. 41
7.2  Deluxe ................................................................. 47

8.  Fuel-Oil or Gas Connections .................................. 54

9.  Servicing and Maintenance ..................................... 54

9.1  Cleaning .............................................................. 54
9.2  Cleaning the Casing Material ............................. 57
9.3  Precautions Required in the Case of Long ......... 57

          Boiler Stops (one or more years)
9.4  Precautions Required if the Heating is ............... 57

          Stopped when there is a Risk of Freezing

10.  Burner Maintenance .............................................. 57

11.  System Maintenance .............................................. 57

11.1  Water Level ....................................................... 57
11.2  Draining ............................................................. 57

12.  Identification Plate ................................................. 57

1.

GENERAL

The boilers of the Viscount GTE range are pressurised hot water
boilers designed for connecting to a flue pipe which require a
separate automatic fuel-oil or gas burner.  The heat output of
Viscount GTE boilers is between 754 and 1450 kW.
Models available :

•

Viscount GTE

Boiler with standard control panel designed to be connected
to the electrical cabinet.

•

Viscount GTE De Luxe

Boiler with “De Luxe” control panel, providing additional
features including running lights and extra wiring facilities.

Option Kits:

Flue Gas Thermometer

Pack ID28

Hour Run Meter

Pack IC8

M.T.H.W. Kit

Pack CM21

WARNING

The boiler shall be assembled and installed by a qualified professional only.
Strict compliance with these assembly, installation and maintenance instructions is a precondition for the correct

operation of the boiler

CONFORMITY /     MARKING

This Product complies with the requirements of the following European directives and standards:
-

90.396 CEE Gas Appliance Directive Relevant standard : EN 303.1 / EN 303.2 / EN 304.

-

73.23 CDD Low Voltage Directive Relevant standard : EN 60.335.1.

-

89.336 CEE Electromagnetic Compatibility Directive Relevant standard : EN 50.081.1 / EN 50.082.1 / EN 55.014.

30

0

I

0

I

VIS5054

30

0

I

VIS5055

Summary of Contents for Viscount GTE 14





























































Reviews:

No comments