7-5
7
MEMORY OPERATION
■
Frequency transferring
The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.
D
D
Transferring in VFO mode
This is useful for transferring programmed contents to
VFO.
q
Select VFO mode with [VFO].
w
Select the memory channel to be transferred with
[M-CH] (and [BANK]).
• Memory list screen is convenient for selecting the de-
sired channel.
• Memory channel contents appear in the memory chan-
nel readout (below the frequency readout).
• “--.---.--” appears if the selected memory channel is a
blank channel. In this case transferring is impossible.
e
Push and hold [M
≈
V] for 1 sec. to transfer the fre-
quency and operating mode.
• Transferred frequency and operating mode appear on
the frequency readout.
D
D
Transferring in memory mode
This is useful for transferring frequency and operating
mode while operating in memory mode.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
•
Displayed
frequency, mode and filter setting are
transferred.
•
Programmed
frequency and mode in the memory
channel are not transferred, and they remain in the
memory channel.
q
Select the memory channel to be transferred with
[M-CH] (and [BANK]) in memory mode.
• And, set the frequency or operating mode if required.
w
Push and hold [M
≈
V] for 1 sec. to transfer the fre-
quency and operating mode.
• Displayed frequency and operating mode are transferred
to the VFO.
e
To return to VFO mode, push [VFO] momentarily.
TRANSFERRING EXAMPLE IN VFO MODE
Operating frequency : 21.320 MHz/USB (VFO)
Contents of M-ch 16 : 14.018 MHz/CW
TRANSFERRING EXAMPLE IN MEMORY MODE
Operating frequency : 21.320 MHz/USB (M-ch 16)
Contents of M-ch 16 : 14.018 MHz/CW
Push for 1 sec.
Beep
Beep
Beep
Rotate
Push for 1 sec.
Beep
Beep
Beep
Programmed contents appear.
