3-5
3
BASIC OPERATIONS
D
D
Tuning with the main dial
Rotate the main dial to change the frequency.
• The frequency changes in increments determined by
the selected tuning step (see below).
q
Push the desired VFO number (0 to 9) and [VFO].
• 10 different sets of VFO data can be selected.
w
Select the desired operating mode. (p.3-7)
• 10 different sets of VFO data can be selected.
e
Push [
▲
UP] or [
▼
DOWN] to select the desired tun-
ing step.
• Selectable tuning steps can be changed for each oper-
ating mode as shown below.
r
Rotate the main dial to set the desired frequency.
D
D
Selecting a tuning step
14 preset tuning steps plus 1 programmable tuning
step are available. As a default setting, selectable tun-
ing steps can be programmed, depending on the op-
erating mode. Selectable tuning steps can be changed
in TS select screen.
• Selecting selectable tuning steps
q
Push and hold [
▲
UP] or [
▼
DOWN] for 1 sec. to
enter the TS select screen to set the selectable tun-
ing steps for each operating mode.
w
Select the desired operating mode. (p.3-7)
e
Push [F-1
▲
] or [F-2
▼
] to select the desired tuning
step.
• 1 Hz, 10 Hz, 100 Hz, 1 kHz, 2.5 kHz, 5 kHz, 6.25 kHz,
9 kHz, 10 kHz, 12.5 kHz, 20 kHz, 25 kHz, 100 kHz,
1 MHz and programmable are selectable.
r
Rotate the main dial to set the tuning step as the
selectable tuning step if desired.
• Push and hold [F-4•DEF] for 1 sec. to select the default
setting.
t
Repeat steps
e
to
r
to choose the selectable tun-
ing steps.
y
Repeat steps
w
to
r
to set the selectable tuning
steps for each operating mode.
u
Push [EXIT/SET] (or [
▲
UP]/[
▼
DOWN]) to exit the
TS select screen.
[F-1•
Y
] [F-2•
Z
] [F-4•DEF] [EXIT/SET] Main dial
TUNING STEP [DOWN
Z
]/[
Y
UP]
Number key
[VFO]
Main dial
TUNING STEP [DOWN
Z
]/[
Y
UP]
Default settings
FM
: All ON
WFM : 20 k, 25 k, 100 k, 1 M, ProgTS
AM
: 1 k, 5k, 9 k, 10 k, 1 MHz
SSB
: 1, 10, 1 k, 1 MHz
CW
: 1, 10, 1 k, 1 MHz
FSK
: 1, 10, 1 k, 1 MHz
P25
: 1 k, 2.5 k, 5 k, 6.25 k, 10 k,
12.5 k, 20 k, 25 k, 100 k, 1 MHz
