Icom IC-R9500 Instruction Manual Download Page 181

Page: 181 / 188

15-5

After firmware loading is completed, the receiver
starts the update automatically and the dialog at left
is displayed.

WARNING!: NEVER

turn the IC-R9500 power

OFF at this stage.
The receiver firmware will be damaged.

When the dialog disappears, the precaution as at
left is displayed.

Read the precaution carefully, and then push
[F-6•OK].

• Return to CF/USB-Memory set menu.

Push [POWER] to turn the IC-R9500 power OFF,
then ON again.

Depending on the status of the update process, ei-
ther of dialogs at left will appears in sequence.

WARNING!: NEVER

turn the IC-R9500 power

OFF at this stage.
The receiver firmware will be corrupted.

After the dialog disappears, the firmware update is
completed and the normal operation screen ap-
pears.

RX-DSP UPDATING...

Please wait for 20sec.

WARNING! NEVER turn power OFF.

Please wait for 45sec.

WARNING! NEVER turn power OFF.

UPDATING THE FIRMWARE

Summary of Contents for IC-R9500





























































































































































































Search results

Summary of Contents for IC-R9500

Reviews:

Related manuals for IC-R9500

Brands by name

Popular brands

Icom IC-R9500, Instruction Manual

Search results

Summary of Contents for IC-R9500

Reviews:

Related manuals for IC-R9500

Brands by name

Popular brands