Icom IC-R9500, Instruction Manual

Page: 58 / 188

4-14
4
RECEIVE MODES
D D
FSK decode set mode
This set mode is used to set the decode USOS func-
tion, time stamp setting, etc.
• Setting contents
q
During FSK mode operation, push [F-3•DECODE]
to select FSK decode screen.
w
Push [F-1•

MENU1

] to select FSK decode menu
2, then push [F-6•SET] to select FSK decode set
mode.
• Push [F-7•WIDE] to toggle the screen size from normal
and wide.
e
Push [F-1•
Y
] or [F-2•
Z
] to select the desired set
item.
r
Set the desired condition using the main dial.
• Push and hold [F-4•DEF] for 1 sec. to select a default
condition or value.
• Push [F-3• Ω ≈ ] to select the set contents for some
items.
t
Push [EXIT/SET] to exit from set mode.
[EXIT/SET] Main dial
[F-1• Y ] [F-2• Z ] [F-3• Ω ≈ ]
[F-4•DEF]
[F-7•WIDE]
• FSK decode set mode screen
Turn letter code decoding after receiving a “space”
(USOS; UnShift On Space function) capability ON
and OFF. • ON : Decode as letter code.
• OFF : Decode as character code.
Selects the new line code of the internal FSK de-
coder.
CR: Carriage Return, LF: Line Feed • CR,LF,CR;LF : Makes new line with any codes.
• CR+LF
: Makes new line with CR+LF code
only.
FSK Decode USOS ON
FSK Decode New Line Code CR,LF,CR+LF
Set the FFT scope waveform averaging function from
2 to 4 and OFF. (default: OFF)
Recommendation!
If you use the FFT scope waveform for tuning, use of
the default, or smaller number setting is recom-
mended.
FSK FFT Scope Averaging OFF
Set the color for the FFT scope waveform.
• The color is set in RGB format.
• The set color is indicated in the box beside the RGB scale. • Push [F-3•
Ω ≈
] to select R (Red), G (Green) and B (Blue),
and then rotate the main dial to set the ratio from 0 to 255.
FSK FFT Scope Waveform Color 51 153 255