8-9
8
SCANS
■
Fine programmed scan/fine
∂
F scan operation
In fine scan (programmed or
∂
F), the scan speed de-
creases when the squelch opens, but the receiver
keeps scanning. The scanning tuning step shifts from
50 Hz to 10 Hz when the squelch opens.
q
Push [EXIT/SET] several times to close a multifunc-
tion screen, if necessary.
w
Push [F-5•SCAN] to select the scan screen.
e
Set for programmed scan or
∂
F scan as described
at p.8-6 and p.8-8.
r
Push [PROG] or [
∂
F] to start a scan.
• “
” or “
” and decimal
points blink while scanning.
t
Push [FINE] to start a fine scan.
• “
” or “
” blinks in-
stead of “
” or “
,” respec-
tively.
y
When the scan detects a signal, the scan speed de-
creases but scan does not stop.
u
Push [PROG] or [
∂
F] to stop the scan; push [FINE]
to cancel the fine scan.
• Pushing [F5•STOP] also cancels the scan.
• Pushing [EXIT/SET] closes the scan screen.
i
Push and hold [F-6•RECALL] for 1 sec. to recall the
frequency that is set before starting the scan, if de-
sired.
:
F SCAN
PROGRAM SCAN
FINE
:
F SCAN
FINE PROGRAM SCAN
:
F SCAN
PROGRAM SCAN
[EXIT/SET]
[SQUELCH]
[
:
F]
[PROG] [FINE]
