![background image](http://html1.mh-extra.com/html/icom/ic-r9500/ic-r9500_instruction-manual_3629681170.webp)
13-10
13
CONTROL COMMAND
D
D
To send/read memory contents
When sending or reading memory contents, additional
codes must be added to appoint the memory channel
as follows.
➥
Additional code: 0000–1219
• Memory channel code
• Memory bank code
D
D
Codes for memory name, bank name,
opening message and clock 2 name
contents
To send or read the desired memory name settings,
the character codes as follows are used.
•
Character’s code
•
Character’s code— Symbols
D
D
Offset frequency setting
The following data sequence is used when sending or
reading the offset frequency setting.
D
D
Tone squelch frequency setting
The following data sequence is used when sending or
reading the tone frequency setting.
D
D
DTCS squelch code setting
The following data sequence is used when sending or
reading the DTCS code setting.
DTCS Polarity
†, ‡
: 0. 1
100 digit: 0–7
10 digit: 0–7
1 digit: 0–7
Fixed digit: 0
†
Fixed digit: 0
q
†
0
0
X
X
X
w
e
X
†
Not necessary when normal is set.
‡
0=Normal, 1=Reverse
100Hz digit: 0–2
10 Hz digit: 0–9
1 Hz digit: 0–9
0.1 Hz digit: 0–9
Fixed digit: 0*
Fixed digit: 0*
q
*
0
0
X
X
X
w
e
X
*Not necessary when setting a frequency.
1 kHz digit: 0–9
100 Hz digit: 0 (fixed)
100 kHz digit: 0–9
10 kHz digit: 0–9
10 MHz digit: 0–9
1 MHz digit: 0–4
q
0
X
X
X
X
X
X
w
e
r
0
1 GHz digit: 0 (fixed)
100 MHz digit: 0–4
Character ASCII code
Description
0–9
30–39
Numerals
A–Z
41–5A
Alphabetical characters
a–z
61–7A
Alphabetical characters
space
20
Word space
Character
ASCII code
Character
ASCII code
!
21
#
23
$
24
%
25
&
26
¥
5C
?
3F
”
22
’
27
`
60
^
5E
+
2B
–
2D
✱
2A
/
2F
.
2E
,
2C
:
3A
;
3B
=
3D
<
3C
>
3E
(
28
)
29
[
5B
]
5D
{
7B
}
7D
|
7C
_
5F
–
7E
@
40
Code
Bank number
Memory Cnannel
0000–0999
Bank-0–Bank-9
0–999
1000–1099
Bank-A (Auto)
A00–A99
1100–1199
Bank-S (Skip)
S00–S99
1200–1219
Bank-P (Scan edge)
P0A–P9B
Code
Bank number
00–09
Bank-0–Bank-9
10
Bank-A (Auto)
11
Bank-S (Slip)
12
Bank-P (Scan edge)