Selects the desired display type from A and B.
(default: A)
Display Type
A
■
Display set mode
Selects the desired signal meter type from “S,” “dBµ,”
“dBµ[EMF]” and “dBm.”
(default: S)
Signal Meter
S
Turns the meter peak hold function ON or OFF.
(default: ON)
This function is used for the bar meter only.
Meter Peak Hold
ON
Sets the memory name indication, during memory
mode operation, ON and OFF. (default: ON)
• ON : The programmed memory name is displayed
above the frequency indication.
• OFF : No memory name is displayed even a mem-
ory name is programmed.
Memory Name
ON
11-8
11
SET MODE
Selects the pop-up indication of the APF filter width
ON and OFF when the APF function is turned ON.
(default: ON)
APF-Width Popup (APF OFF
➞
ON)
ON
Selects the pop-up indication of the received ID in
P25 mode ON and OFF. (default: ON)
• ON (Hex): The received ID code (hexadecimal indi-
cation) is displayed when an ID code is
received.
• ON (Dec): The received ID code (decimal indication)
is displayed when an ID code is received.
(default)
• OFF
: No ID code is displayed when an ID code
is displayed.
P25 RX ID Popup
ON (Dec)
Selects the pop-up indication of the notch filter width
ON and OFF when the notch filter is turned ON.
(default: ON)
MN-Q Popup (MN OFF
➞
ON)
ON
Turns the screen saver function ON (15, 30 or 60 min-
utes) and OFF.
(default: 60 min.)
The screen saver will activate when no operation is
performed for the selected time period to protect the
LCD from “burn-in.”
Screen Saver Function
60min
NOTE:
“Display set (Video) mode” is described on page 11-24.
