11-24
11
SET MODE
■
Display set (Video) mode
This set mode is used to set the HSB (Hue,
Saturation, Brightness) color setting for video input or
output, etc.
N
OTE:
“Display set mode” is described on page 11-8.
q
Push [DISPLAY] momentarily to turn the mini TV
screen, if necessary.
w
Push and hold [DISPLAY] for 1 sec. to select the
display set (Video) mode.
e
Push [F-1•
Y
] or [F-2•
Z
] to select the desired set
item.
r
Set the desired condition using the main dial.
• Push and hold [F-4•DEF] for 1 sec. to select a default
condition or value.
t
Push [EXIT/SET] to exit from set mode.
NOTE:
Video output from [DATA IN] is available an
NTSC system only.
[EXIT/SET]
[DISPLAY]
Main dial
[F-1•
Y
] [F-2•
Z
] [F-4•DEF]
Adjusts the saturation (vibrancy of the color) of the
video signal from [VIDEO IN] jack. Adjustable range
is 0 (shade of gray) to 100% (vivid color) in 1% steps.
(default: 50%)
Adjusts the hue (color type) of the video signal from
[VIDEO IN] jack. Adjustable range is 0 (red) to 100
(green) in 1 steps. (default: 50)
NOTE:
This setting is available when NTSC sys-
tem signal is input from [VIDEO IN] connector.
VIDEO IN Saturation
50%
VIDEO IN Hue (NTSC)
50%
Adjusts the LCD contrast of the video signal from
[VIDEO IN] jack. Adjustable range is 0 (low contrast)
to 100% (high contrast) in 1% steps. (default: 50%)
VIDEO IN Contrast
50%
Adjusts the LCD brightness of the video signal from
[VIDEO IN] jack. Adjustable range is 0 (dark) to 100%
(bright) in 1% steps. (default: 50%)
VIDEO IN Bright
50%
Selects the TV system of your local area from “NTSC
M,” “PAL B/G,” “PAL I,” “PAL D” and “SECAM K.”
NOTE:
Default setting is different depending on
versions.
TV Standard
NTSC M
