8-12
8
SCANS
D
D
Programming the select memory scan setting
q
Push [EXIT/SET] several times to close a multifunc-
tion screen, if necessary.
w
Push [F-4•MEMORY] to select memory list screen.
e
While pushing and holding [F-1•ROLL] or [F-2•SET],
rotate the main dial to select the desired memory
channel.
• [M-CH] (or [BANK]) control and direct keypad selection
can be used.
r
Push and hold [F-3•SELECT] for 1 sec. to display
the memory-select window.
t
Rotate the main dial to select the desired select
memory channel group.
•
★
1 to
★
9 are selectable
.
• Memory-select window
y
Push [F-3•SELECT] to set the select setting ON.
• Push [F-3•SELECT] again to select the select setting
OFF.
u
Repeat steps
e
to
y
to program another memory
channel as a select memory channel, if desired.
• If you want to set a same select channel group, skip
steps
r
and
t
.
i
Push [EXIT/SET] to exit the memory list screen.
D
D
Erasing the select scan setting
q
Push [EXIT/SET] several times to close a multifunc-
tion screen, if necessary.
w
Push [F-4•MEMORY] to select memory list screen.
e
Push and hold [F-3•SELECT] for 1 sec. to display
memory-select window.
r
Rotate the main dial to select the desired select
memory channel group to be erased.
t
Push and hold [F-2• ALL CLR] for 1 sec. to clear all
select scan settings.
y
Push [EXIT/SET] to exit the memory list screen.