![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336084.webp)
7
dPMR™ OPERATION
7-4
D
Transmitting a Talkgroup call
You can call a specifi ed Talkgroup stations.
<Menu operation>
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
(Menu > Signaling/Call >
Call List Select
)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select “Signaling/Call,”
then push [OK]�
3� Push [Up] or [Down] to select “Call List Select,”
then push [OK]�
4� Push [Up] or [Down] to select a Talkgroup ID�
TIP:
About the Direct Dial function
When you select “Direct Dial” at the end of the
list, you can directly enter a Talkgroup ID using
[Up]/[Down] or Ten-key pad�
L
Push [Left]/[Right] to move the cursor and push
[Back] to delete the entered ID�
L
After entering, push [OK] to set the ID�
5� Push [PTT] to transmit the Talkgroup call�
6� Hold down [PTT] and speak at your normal voice
level� Release [PTT] to receive�
7� After the communication is finished, push [Back]�
•
The transceiver sends a Disconnect signal to
terminate the call�
L
Only the caller station can send a Disconnect signal�
TIP:
•
You can transmit a Talkgroup call through the Call
Menu� (Menu > Signaling/Call >
Call menu
)
•
When a Talkgroup ID is programmed in the
Memory CH, you can transmit the Talkgroup call
by pushing [PTT] on the channel�
<Key operation>
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
Using [Call List Select]:
1� Push [Call List Select] to display the “Call List
Select” screen�
2� Push [Up] or [Down] to select a Talkgroup ID�
L
See “
TIP: About the Direct Dial function
” in step 4
to the left�
3� Push [PTT] to transmit the Group call�
4� Hold down [PTT] and speak at your normal voice
level� Release [PTT] to receive�
5� After the communication is finished, push [Back]�
•
The transceiver sends a Disconnect signal to
terminate the call�
L
Only the caller station can send a Disconnect signal�
Using [Group]:
1� Push [Group] to display the “Group Select”
screen�
2� Push [Up] or [Down] to select a Talkgroup ID�
L
See “
TIP: About the Direct Dial function
” in step 4
to the left�
3� Push [PTT] to transmit the Group call�
4� Hold down [PTT] and speak at your normal voice
level� Release [PTT] to receive�
5� After the communication is finished, push [Back]�
•
The transceiver sends a Disconnect signal to
terminate the call�
L
Only the caller station can send a Disconnect signal�
TIP:
You can display the “Group Select” screen
through the Menu screen�
(Menu > Signaling/Call >
Group Select
)
Transmitting a call