![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336107.webp)
7
dPMR™ OPERATION
7-27
The Over-The-Air Programming (OTAP) function
enables wireless programming� When the PC sends
OTAP data to the OTAP Management transceiver
that is connected to the PC, the OTAP Management
transceiver writes the data to the Subscriber Unit
(SU) over the air. The ICF file data is used as the
OTAP data, and you can edit the ICF file using the
programming software�
Up until now, you needed programming software,
a PC, and a cable to program transceivers� As the
number of transceivers in a system increased, the
programming cost was higher and it took more time to
program�
This function provides easier and faster programming,
and lowers the cost�
TIP:
See the optional CS-OTPM1 Help file or its
instruction manual for details�
OTAP Management
Transceiver
PC
(The CS-OTPM1 is installed)
OTAP
data
SU
SU
SU
SU
ICF file
SU
Internet
Internet
Repeater
Repeater
L
SU= Subscriber Unit
Over-The-Air Programming (OTAP) function