![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336179.webp)
13
OTHERS
13-7
Customizing the channel announcement
You can change the channel announcement to suit
your operating needs. The channel announcement
customizing is convenient for the localization by using
your local languages.
D
Customizing the channel announcement
1�
Connect a transceiver to your PC using a USB
cable.
2� Set the
USB Mode Select
to “Card Reader.”
(Menu > Function >
USB Mode Select
)
3�
Open the Announce folder according to the
instructions on page 9-8.
4�
Save announcement files in the Announce folder
using your PC.
NOTE:
The announcement files have to satisfy
the following conditions.
The file format is “wav.”
• 16 bit
• Sampling frequency: 8 kHz
• Number of channel: mono
The file is named as
• “Announce_Channel_xxx_yyy.wav” for the
transceivers with an LCD.
• “Announce_Position_zz.wav” for the
transceivers without an LCD.
L
xxx: Zone number, yyy: Channel number,
zz: [Selector]ʼs position
5� Set the
USB Mode Select
to “Data Transfer.”
(Menu > Function >
USB Mode Select
)
6� Turn OFF the transceiver�
7�
Turn ON the transceiver.
• The entered announcement is made.
D
Returning to the default setting
1�
Connect a transceiver to your PC using a USB
cable.
2� Set the
USB Mode Select
to “Card Reader.”
(Menu > Function >
USB Mode Select
)
3�
Open the Announce folder according to the
instructions on page 9-8.
4�
Delete the announcement files from the Announce
folder.
5� Set the
USB Mode Select
to “Data Transfer.”
(Menu > Function >
USB Mode Select
)
6� Turn OFF the transceiver�
7�
Turn ON the transceiver.
• Returns to the default announcement.