![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336095.webp)
7
dPMR™ OPERATION
7-15
D
Receiving an Ambience Listening call
If an Ambience Listening call is received from a
specifi ed station, the transceiver will automatically
transmit its microphone audio�
NOTE:
If the transceiver receives an Ambience
Listening command from a station other than the
specifi ed one, the call will be ignored, and the
transceiver will not transmit its microphone audio�
D
Receiving a Stun,
Kill or
Revive
If a Stun or Kill command is received, the transceiver
will display “SORRY”*
1
and you cannot receive or
transmit*
2
�
When a Stun command is received, you cannot
operate the transceiver until a Revive command is
received or the password is input�
When a Kill command is received, you cannot operate
the transceiver until data programming is performed�
NOTE:
The transceiver can receive the Stun, Revive
and Kill commands that are from a specifi ed station.
*
1
Only for the Portable Ten-key and Simple key types and
the Mobile LCD types�
*
2
Depending on the presetting, reception may be enabled�
D
Receiving an Emergency call
1� When an Emergency call is received:
•
Beeps sound�
•
“Emergency” and the calling station name (or ID) are
alternately displayed�
*
1
•
“ ” is displayed and the mute is released�*
1
•
“
” may be displayed or blink, depending on the
presetting�*
1
•
The transceiver automatically transmits an
acknowledgement to the calling station�
2� Hold down [PTT], then speak into the microphone�
3� After the communication is finished, push [Back]�
•
The transceiver sends a Disconnect signal to
terminate the call�
•
“ ” disappears, and “Clear Down” is displayed for
approximately 2 seconds�*
1
L
The transceiver returns to the Standby mode�
D
Receiving a Broadcast call
If a Broadcast call is received, the user can listen to
the announcement from the caller station�
NOTE:
Until receiving a Disconnect signal, the
transmission is disabled�
Receiving a call