![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336032.webp)
2
PANEL DESCRIPTION
2-24
D
For keys and keypads (Continued)
Assignable Software key functions
Category: Display
Backlight
Push to select the Backlight level
(For the Portable type transceivers)
•
OFF: The backlight is continuously OFF
•
ON: Turns the backlight is continuously ON
•
Auto: When any switch except [PTT] is pushed, the
backlight lights for 5 seconds
(For the Mobile type transceivers)
•
OFF: The backlight is continuously OFF
•
ON: Turns the backlight is continuously ON
•
Auto: Turns the backlight continuously ON with the
Brightness setting level
When the Dimmer terminal of the D-Sub 25
pin or Option Connector 22 pin is activated,
the backlight lights dimly
Brightness
Push to open the “Brightness” window Then, push
[Up] or [Down] to select the desired level between 0
(the lowest) and 7 (the highest)
Dimmer
Push to open the “Dimmer” window Then, push [Up]
or [Down] to select the desired level between 0 (the
lowest) and 7 (the highest)
NOTE:
It is recommended to be the Dimmer level
lower than the Brightness level
LCD Mode
Push to select the LCD Mode
•
Day : The LCD is set to the Day mode
The Day mode is for the daytime operation,
and the display backlight color is set to
white
•
Night : The LCD is set to the Night mode
The Night mode is for the nighttime
operation, and the display backlight color is
set to black
Category: Control Head Setting
Intercom
(For the Mobile type transceivers)
Push to turn the Intercom function ON or OFF
The function enables communication between
CONTROL HEAD 1 and CONTROL HEAD 2 during
the dual-head operation using the optional RMK-7 or
HM-218*
* RMK-5
is required to connect to the transceiver
NOTE:
While communicating using the Intercom
function, you can use only [PTT] and [VOL]