![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336070.webp)
6
MENU SCREEN
6-12
RX Speaker
(For the Mobile types)
Turns the RX speaker function ON or OFF�
When this function is ON, the received audio can be
heard through an external speaker that is connected
to the D-Sub 25 pin connector�
NOTE:
•
This function is usable when an external speaker is
connected to the D-Sub 25 pin connector�
•
This function is useful when a user is out of the
vehicle�
•
The audio output level is linked to the transceiver’s
volume control�
Surveillance
Turns the Surveillance function ON or OFF�
When this function is ON, beeps are not heard and
the backlight and the Status indicator do not light,
even when a signal is received, or a key is pushed�
USB Mode Select
Selects the USB port mode�
•
Data Transfer: Used for setting up the transceiver,
updating the firmware, or using the
PC control command�
•
Card Reader: Reads the inserted card contents�
VOX
Turns the VOX function ON or OFF�
When this function is ON, the receive and transmit are
automatically switched by detecting the user’s voice�
NOTE:
To use the function, a headset* and a VOX
converter cable are required (user supplied)�
*Bluetooth headset is also usable�
VOX Delay
Sets the VOX Delay�
The VOX Delay is the period of time the transceiver
continues transmitting after the user stops speaking,
and then the VOX switches to receive�
•
Range: 0�5 ~ 3�0 seconds
NOTE:
If you set the time too short, a pause in
a conversation may be regarded as the end of
conversation, and the transceiver will start receiving,
even as the conversation continues�
VOX Gain
Sets the VOX gain�
The VOX function automatically switches between
receive and transmit by detecting the user’s voice�
•
Range: 1 ~ 10
L
Higher values make the VOX function more sensitive to
sounds�
Zeroize
In the Digital mode
Disables the Encryption Key�
After Zeroizing, the Encryption function is disabled
until the transceiver is programmed again�
NOTE:
When Zeroizing, both the Encryption Key in
the transceiver, and the registered Encryption Key in
the UT-134 are deleted�
Functions