![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336028.webp)
2
PANEL DESCRIPTION
2-20
Category: Signaling/Call (Continued)
Emergency
1 Hold down during the Emer SW ON Timer period
to enter the Emergency mode
2 After the Reminder Timer period has passed, an
Emergency call is automatically transmitted once,
or repeatedly
NOTE:
•
Set the related settings using the programming
software
•
This key function is assignable to only [Emer] or
[Ext Emer]
L
Hold down during the Emer SW OFF Timer
period to cancel the Emergency function, before
transmitting an Emergency call
Power OFF Emergency
(For the Mobile type transceivers)
While holding down this key, turn OFF the transceiver
to activate the Power OFF Emergency function
NOTE:
This key function is assignable to only [Emer]
or [Ext Emer]
Information
L
•
This function makes the transceiver transmit Emergency
calls, even though it appears to be powered OFF
•
When the function is activated, any key operation, hanger
action and Lone Worker function becomes invalid, as well
as the Status indicator and speaker become the same as
being powered OFF
On the other hand, the transceiver can transmit Emergency
calls according to the Emergency settings, and the
Ambience Listening function is also activated, if it is set
•
To cancel the function and restore the transceiver, turn ON
the transceiver
Telephone
In the Digital mode
In the Digital mode (dPMR™ Trunking only)
Push to display the “Phone List” screen Then, push
[Up] or [Down] to select a phone number After
selecting, push [OK] to connect to the telephone
network
Individual
Push to display the “Individual ID” screen Then, push
[Up] or [Down] to select an Individual ID name (or ID
code) After selecting, push [OK] to set
Group
Push to display the “Group ID” screen Then, push
[Up] or [Down] to select an Group ID name (or ID
code) After selecting, push [OK] to set
Status
Push to display the “Status List” screen Then, push
[Up] or [Down] to select a Status message
After selecting, push [PTT] to send the message to
the currently selected station or group Or, push [OK]
to set
L
See pages 7-5, 8-7 for details
Message
While in the Standby mode, push to display the
“Message List” screen Then, push [Up] or [Down] to
select a message
After selecting, push [PTT] to send the message to
the currently selected station or group
L
See pages 7-7, 8-9 for details
Write Message
In the Digital mode
Push to display the “Write Message” screen
After entering, push [PTT] to send the message to the
currently selected station or group
L
See page 7-9 for details
D
For keys and keypads
Assignable Software key functions