11
Bluetooth
®
OPERATION
11-5
Mobile:
Step 1: Entering the Bluetooth
®
Set mode
(Transceiver)
1� Turn OFF the transceiver�
2� While holding down [F2] and [F3], turn ON the
transceiver� Continue holding down [F2] and [F3]
for about 3 seconds�
•
2 beeps sound�
Step 2: Entering the Pairing mode
(Bluetooth
®
device)
L
See the Bluetooth
®
device’s instruction manual for
details�
Step 3: Turning ON the Bluetooth
®
function
(Transceiver)
3� After the headset has entered the Pairing mode,
hold down [F1] for 1 second to enter the Set
mode�
4� Push [F2] or [F3] to select “b0�”
5� Push [Up] to turn ON the Bluetooth
®
function�
•
The transceiver automatically enters the Pairing mode,
and begins searching for a Bluetooth
®
headset�
•
While searching, the status indicator quickly blinks
blue�
L
If the status indicator does not blink after pushing
[Up], the transceiver has not entered the Bluetooth
®
Set mode� In that case, do steps 1 and 2 again�
L
If the transceiver has been paired with a Bluetooth
®
headset before, the transceiver does not start
searching� In that case, the transceiver and the
headset are automatically connected�
Step 4: Pairing with a headset
(Transceiver)
When a headset is found, the transceiver pairs with it�
•
After the transceiver and the headset pairing has
succeeded, the Status indicator slowly blinks blue 3 times�
In that case, the connection to the headset has also
succeeded�
L
Thetransceiversearchesforaheadsetfirst.After
searching for a headset, the transceiver will start
searching for a data device� To skip searching for a data
device, push [PTT] on the headset�
L
If the Bluetooth
®
connection fails, the Status indicator
slowly blinks red 3 times� To search for a headset again,
push [Down] to turn OFF the Bluetooth
®
function, then
push [Up] to turn it ON again�
Step 5: Pairing with a data device
(Transceiver)
1� When a data device is found, the transceiver pairs
with it�
•
After the transceiver and the data device pairing has
succeeded, the Status indicator slowly blinks blue 3
times� In that case, connection to the data device has
also succeeded�
L
If the Bluetooth
®
connection fails, the Status indicator
slowly blinks red 3 times� To search for a PC again,
push [Down] to turn OFF the Bluetooth
®
function,
then push [Up] to turn it ON again� The transceiver
automatically tries to connect�
2� Hold down [F1] for 1 second to exit the Set mode�
3� Turn OFF the transceiver, then turn it ON again to
normally operate the transceiver�
D
For the Portable Non-display types and Mobile Segment types (Continued)
F1
F2
F3
[Up]
[Down]
[F1] [F2] [F3]
Power key
TIP:
To turn OFF the Bluetooth
®
function, push
[Down] when “b0” is selected in the Set mode�
Turning ON the Bluetooth
®
function
