![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336160.webp)
12
USER SETTINGS
12-3
<Key opeomaioI>
Pooamble:
For the Non-display types
1� Turn OFF the transceiver�
2� Set [Selector] to any channel other than Channel
16�
3� While holding down [F3], turn ON the transceiver�
Continue holding down [F3] for about 3 seconds�
•
2 beeps sound�
•
The transceiver enters the Key-touch Beep level Set
mode�
4� Push [F2] or [F3] to set the Key-touch Beep level�
InoormaioI
L
•
The setable range is 1 ~ 5, 1 (Linked) ~ 5 (Linked) or
OFF�
•
When you select a Linked option, the beep level is
adjustable by rotating [VOL]�
•
A beep sounds after pushing [F2] or [F3]� An error
beep sounds if you try to exceed the setable range�
5� Turn OFF the transceiver, then turn it ON again to
exit the Key-touch Beep level Set mode�
You can set the Key-touch Beep level�
A beep sounds when you operate a key�
<MeIu opeomaioI>
Pooamble:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
( Menu > Utility >
Key-aouch Beep Lv
)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select “Utility,” then push
[OK]�
3� Push [Up] or [Down] to select “Key-touch Beep
Lv,” then push [OK]�
4� Push [Up] or [Down] to set the Key-touch Beep
level, then push [OK]�
L
The setable range is 1 ~ 5, 1 (Linked) ~ 5 (Linked) or
OFF�
L
When you select a Linked option, the beep level is
adjustable by rotating [VOL]�
5� Hold down [Back] for 1 second to return to the
standby screen�
SeaaiIg oodeo on ahe Key-aouch Beep level
2
5
4
3
OFF
1
5 (Linked)
4 (Linked)
3 (Linked)
2 (Linked)
1 (Linked)
: Push [F2]
: Push [F3]
[VOL]
[F2]
[F3]
[Selector]
SeaaiIg ahe Key-aouch Beep level