7
dPMR™ OPERATION
7-14
D
Receiving an Individual call
1� When an Individual call is received:
•
Beeps sound�
•
“ ” is displayed and the mute is released�*
•
“
” may be displayed or blink, depending on the
presetting�*
•
The Status indicator lights green�
•
“Private Call” and the calling station name (or ID) are
displayed while receiving the signal�*
2� Hold down [PTT] and speak at your normal voice
level� Release [PTT] to receive�
3� After the communication is finished, push [Back]�
•
The transceiver sends a Disconnect signal to
terminate the call�
•
“ ” disappears, and “Clear Down” is displayed for
approximately 2 seconds�*
L
Either station can send a Disconnect signal�
L
The transceiver returns to the Standby mode�
* Only for the Portable Ten-key and Simple key types and the
Mobile LCD types�
D
Receiving a Talkgroup call
1� When a Talkgroup call is received:
•
Beeps sound�
•
“ ” is displayed and the mute is released�*
•
“
” may be displayed or blink, depending on the
presetting�*
•
The Status indicator lights green�
•
The Talkgroup name and the calling station name (or
ID) are displayed while receiving the signal�*
L
When an All Call is received, “All Call” is displayed
instead of the Talkgroup name�*
2� Hold down [PTT] and speak at your normal voice
level� Release [PTT] to receive�
NOTE:
Only one station is allowed to speak at
the same time�
3� After the communication is finished, push [Back]�
•
The transceiver sends a Disconnect signal to
terminate the call�
•
“ ” disappears, and “Clear Down” is displayed for
approximately 2 seconds�*
L
Only the caller station can send a Disconnect signal�
L
The transceiver returns to the Standby mode�
D
Receiving a Status message
1� When a Status message is received:
•
Beeps sound�
•
The Status message and the calling station or Group
name (or ID) are displayed�*
•
“
” blinks�*
•
Portable type transceivers may vibrate, depending on
the presetting�
2� Push [Back] to stop the display indication�
D
Receiving a Message
1� When a Message is received:
•
Beeps sound�
•
The Message and the calling station or Group name
(or ID) are displayed�*
•
“
” blinks�*
•
Portable type transceivers may vibrate, depending on
the presetting�
2� Push [Back] to stop the display indication�
Receiving a call
