![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336159.webp)
12
USER SETTINGS
12-2
<Key opeomaioI>
Pooamble:
For the Ten-key and the Simple key types
Push [Backlight] to select the option�
•
OFF: Turns the Backlight continuously OFF�
•
ON: Turns the Backlight continuously ON�
•
Auto: When any key except [PTT] is pushed, the
Backlight lights for 5 seconds�
Mobile:
For the LCD types
Push [Backlight] to select the option�
•
OFF: Turns the Backlight continuously OFF�
•
ON: Turns the Backlight continuously ON�
•
Auto: Turns the Backlight continuously ON�
When the Dimmer terminal of the D-Sub 25
pin or Option Connector 22 pin is activated,
the Backlight lights dimly�
Mobile:
For the Segment types
1� Turn OFF the transceiver�
2� While holding down [F2] and [F3], turn ON the
transceiver� Continue holding down [F2] and [F3]
for about 3 seconds�
•
2 beeps sound�
3� Hold down [F1] for 1 second to enter the Set
mode�
4� Push [F2] or [F3] to display “A0�”
5� Push [Up] or [Down] to select the option�
•
OFF: Turns the Backlight continuously OFF�
•
ON: Turns the Backlight continuously ON�
•
Auto: Turns the Backlight continuously ON�
When the Dimmer terminal of the D-Sub
25 pin or Option Connector 22 pin is
activated, the Backlight lights dimly�
Auto
ON
OFF
: Push [Up]
: Push [Down]
6� Hold down [F1] for 1 second to exit the Set mode�
7� Turn OFF the transceiver, then turn it ON again to
normally operate it�
You can set the Backlight status�
<MeIu opeomaioI>
Pooamble:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
( Menu > Display >
Bmckligha
)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select “Display,” then push
[OK]�
3� Push [Up] or [Down] to select “Backlight,” then
push [OK]�
4� Push [Up] or [Down] to select an appropriate
option, then push [OK]�
Foo ahe Pooamble aypes:
•
OFF: Turns the Backlight continuously OFF�
•
ON: Turns the Backlight continuously ON�
•
Auto: When any key except [PTT] is pushed, the
Backlight lights for 5 seconds�
Foo ahe Mobile aypes:
•
OFF: Turns the Backlight continuously OFF�
•
ON: Turns the Backlight continuously ON�
•
Auto: Turns the Backlight continuously ON�
When the Dimmer terminal of the D-Sub 25 pin
or Option Connector 22 pin is activated, the
Backlight lights dimly�
5� Hold down [Back] for 1 second to return to the
standby screen�
<Leveo swiach opeomaioI>
Pooamble:
For all types
When [Backlight] is assigned to the Lever switch:
Slide the Lever switch to the “ ” position to turn the
backlight continuously ON�
Slide the Lever switch to the “
Ο
” position to turn the
backlight continuously OFF�
F1
F2
F3
[Up]
[Down]
[F1] [F2] [F3]
Power key
NOTE:
When the Brightness or Dimmer* level is set
to “0,” nothing may be displayed on the segment type
screen� In that case, set the Brightness or Dimmer*
level using the optional programming software�
* Only when the Dimmer terminal of the D-Sub 25 pin or
Option Connector 22 pin is activated�
SeaaiIg ahe Bmckligha samaus