![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336086.webp)
7
dPMR™ OPERATION
7-6
D
Transmitting a Status message (Continued)
<Key operation>
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
Using [Status]:
1� Push [Status] to display the “Status” screen�
2� Push [Up] or [Down] to select a Status Message,
then push [PTT] to transmit it�
L
“Success” is displayed after receiving an
acknowledgement from the target station�
L
“Failed” is displayed if the target station does not
send back an acknowledgement�
Portable:
For All types
Mobile:
For All types
NOTE:
The following operation is enabled only when
[Selector] is set to “Status” using the programming
software�
Using [Status]:
Hold down [Status] for 1 second to transmit the preset
Status Message�
NOTE:
The status message can be automatically
transmitted when:
•
The transceiver is turned ON or OFF
L
Set the Status message to be transmitted in ‘Power
ON Status’ or ‘Power OFF Status’ item, respectively�
L
Set the target station ID in ‘Power Status ID�’
• [PTT] is released
L
Set the ‘Send with Log-off’ item to ‘ON�’
L
Set the Status message to be transmitted�
Transmitting a call