![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336115.webp)
8
BIIS 1200 SYSTEM OPERATION
8-8
D
Transmitting a Status message (Continued)
<Key operation>
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
Using [Status]:
1� Push [Status] to display the “Status” screen�
2� Push [Up] or [Down] to select a Status Message,
then push [PTT] to transmit it�
L
“Success” is displayed after receiving an
acknowledgement from the target station�
L
“Failed” is displayed if the target station does not
send back an acknowledgement�
Portable:
For the Non-display types
Mobile:
For the Segment types
Using [Status]:
Hold down [Status] for 1 second to transmit the preset
Status Message�
TIP:
This operation is enabled only when [Selector]
is set to “Status” using the programming software�
NOTE:
The status message can be automatically
transmitted when:
•
The transceiver is turned ON�
L
Set the ‘Power ON Status23’ item to ‘Enable�’
•
The transceiver is turned OFF�
L
Set the ‘Power OFF Status19’ item to ‘Enable�’
Transmitting a call