![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336182.webp)
14
OPTIONS
14-3
Belt clip
Turn OFF the transceiver
before attaching or
detaching the microphone
NOTE:
•
NEVER
immerse the connector in water� If the
connector becomes wet, be sure to dry it BEFORE
attaching to the transceiver�
•
The microphone element is located at the top
left of the speaker microphone, as shown in the
illustration above� To maximize the readability
of your transmitted audio, hold the microphone
approximately 5 to 10 cm (2 to 4 inches) from your
mouth, and then speak at your normal voice level�
D
Attaching
Attach the connector of the speaker microphone to
the multi connector on the transceiver and tighten the
screw�
[PTT]
[Emer]
Speaker
Microphone
Earphone jack
Turn OFF
Screw
Coin
CAUTION:
Firmly attach to the multi
connector, but do not overtighten�
A loose connection will allow water
intrusion into the connector� An
overtightened connection will damage
the connector pins on the transceiver�
NOTE: KEEP
the connector cover attached to the
transceiver when the speaker microphone is not in use�
Water will not get into the transceiver, even if the
cover is not attached� However, the terminals (pins)
will become rusty, or the transceiver will function
abnormally if the connector becomes wet�
You can connect
an earphone (user
supplied) to the
earphone jack on
the microphone�
HM-222
speaker
microphone
(for the Portable type transceiver)