background image

E

n

Wireless USB Audio Transport

UWL-1

Instruction Manual

Thank you for purchasing the Onkyo Wireless 
USB Audio Transport. Please read this manual 
thoroughly before making any connections and 
plugging it in.
Following the instructions in this manual will 
enable you to obtain optimum performance and 
listening enjoyment from your new Wireless USB 
Audio Transport. 
Please retain this manual for future reference.

Contents

Package Contents ........................... 5

Features ........................................... 6

Getting to Know the UWL-1 ........... 7

Transmitter (UTX-1) ........................... 7
Receiver (RX-1) Front and Top .......... 7
Receiver (RX-1) Rear......................... 7

Getting Started................................ 8

System Requirements ............................. 8
Precautions for Using this Product .......... 8

Setting Up the UWL-1 ..................... 9

Connecting the Transmitter (UTX-1) ........ 9
Connecting the Receiver (RX-1)............ 10

Typical Hookup Example.................. 10
Connecting an Onkyo Component with 

a DC Output (European Model).. 11

Changing the Receiver’s ID ................... 11

Using the UWL-1 ........................... 12

Setting the Windows® Volume Control 

Settings ...................................... 12

Listening to Music .................................. 13

Changing the Wireless Channel....... 14

Using Windows® Media Player.............. 14
Enabling CD Playback ........................... 15

Troubleshooting ............................ 16

Confirming Driver Installation ................ 18
Confirming the Audio Playback Device.. 19

Specifications ............................... 20

Summary of Contents for UWL-1





















Reviews: