![background image](http://html1.mh-extra.com/html/icom/ic-f5060-series/ic-f5060-series_operating-manual_4283392045.webp)
42
5
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Transmitting a Status Polling Call
The transceiver can send a signal that causes the targeted
station to automatically transmit its current status.
q
Push
[Digital Button]
to enter the application selection
mode.
• “
VOICE
” appears.
• To change the call type, hold down
[Digital Button]
for 1 second
during standby operation. After changing, the transceiver auto-
matically enters the application selection mode.
w
Push
[CH Up]
or
[CH Down]
to select “
STAT POL
”.
e
Push
[Digital Button]
again to enter the Individual ID se-
lection mode.
• A preprogrammed ID name is displayed.
• When an ID name is not programmed, an ID code is displayed.
• The primarily ID can be preset to display first.
This function is usable in transceivers whose revision number is
2.9 or later. Ask your dealer for details.
r
Push
[CH Up]
or
[CH Down]
to select the desired ID name
or ID code.
• Depending on the presetting, you may be able to directly input
the ID. (The optional HM-152T is required.) See page 43 for de-
tails.
S T A T
P O L
S T A T I O N
1
The individual ID name is displayed.
t
Push
[PTT]
to transmit the status polling to the selected
station.
• “
STAT POL
” is displayed.
y
Release
[PTT]
.
• The status message is displayed if an acknowledgement and the
current status is received from the targeted station.
• “
POL FAIL
” is displayed if no acknowledgment and status is re-
ceived from the targeted station.
u
After a specified time period has passed, your transceiver
will return to the standby mode.