28
5
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Receiving a Stun, Kill or Revive
If an individual call with Stun or Kill command is received, the
transceiver will display “SORRY” and you can not receive
*
or transmit. (RAN code matching may not be necessary, de-
pending on the presetting.)
* Depending on the received Stun command setting.
➥
When a Stun command is received:
• The transceiver cannot be operated until an individual call with
a Revive command is received or you input a password. (RAN
code matching may not be necessary, depending on the preset-
ting.)
➥
When a Kill command is received:
• The transceiver cannot be operated until the transceiver is repro-
grammed. Ask your dealer for details.
NOTE:
Depending on the presetting, the transceiver may
ignore the Stun, Revive and Kill commands that are from a
non-specified station.
This function is usable in transceivers whose revision num-
ber is 2.9 or later. Ask your dealer for details.
D
Receiving a Remote Monitor, Radio Check
or Status Polling Call
If an individual call with a Remote monitor, Radio check or
Status polling command is received, the transceiver automat-
ically will transmit. (RAN code matching may not be neces-
sary, depending on the presetting.)
➥
When a Remote monitor command is received:
• The microphone audio is automatically transmitted for the set
time period.
➥
When a Radio check command is received:
• The transceiver automatically transmits an acknowledgement
call.
➥
When a Status polling command is received:
• The transceiver automatically transmits a status call.
