![background image](http://html1.mh-extra.com/html/icom/ic-f5060-series/ic-f5060-series_operating-manual_4283392035.webp)
32
5
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Transmitting a call
IDAS operation allows you to make a call to a specific station
(Individual call) or to a particular group (Talkgroup call). Other
transceivers on the channel will not receive a call that does
not match their individual or talkgroup ID and/or RAN (Radio
Access Number) code.
NOTE:
When the handshake (repeater access) is failed
after pushing
[PTT]
, the transceiver starts roaming.
• This function is usable in transceivers whose revision number is
4.3 or later. Ask your dealer for details.
D
Transmitting a Voice Call
q
Push
[Digital Button]
to enter the application selection
mode.
• “
VOICE
” appears.
• To change the call type, hold down
[Digital Button]
for 1 second in
the standby mode. After changing, the transceiver automatically
enters the application selection mode.
I N D I V I D U A L
V O I C E
* This illustration is described with Individual call type.
w
Push
[Digital Button]
again to enter the Individual or Talk-
group ID selection mode.
• The preprogrammed ID name is displayed.
• When an ID name is not programmed, the ID code is displayed.
• The primarily ID can be preset to display first.
This function is usable in transceivers whose revision number is
2.9 or later. Ask your dealer for details.
• When you want to send a voice message to all transceivers
within the communication range, use the ‘All Call’ function–— se-
lect the Talkgroup ID code “65535”.
e
Push
[CH Up]
or
[CH Down]
to select the desired ID name
or ID code.
• Depending on the presetting, you may be able to directly input
the ID. (The optional HM-152T is required.) See page 43 for de-
tails.
V O I C E
S T A T I O N
1
Individual or Talkgroup
ID name is displayed.
r
Hold down
[PTT]
, then speak into the microphone to send
a voice message to the selected station or talkgroup.
t
Release
[PTT]
to receive.
Convenient!
(The optional HM-152T is required.)
Depending on the presetting, you may be able use the quick
ID selection for Voice Call.
➥
While in the standby mode, push the desired digit key ([1]
to [9] or [0]) to enter the ID selection mode.
• The appropriate ID is displayed.