20
3
MDC 1200 SYSTEM OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Transmitting a Stun Call
Stun call allows you to send MDC 1200 system signal that
will stun the targeted station.
q
Push
[MDC Call]
to enter the MDC menu selection mode.
w
Push
[CH Up]
or
[CH Down] to
select “
STUN
”.
S T U N
e
Push
[MDC Call]
again to enter the transceiver alias se-
lection mode.
r
Push
[CH Up]
or
[CH Down]
to select the desired alias.
t
Push
[PTT]
to transmit the stun call to the selected sta-
tion.
• “
STN TX
” is displayed.
y
Release
[PTT]
.
• “
STN ACK
” is displayed if an acknowledgement is received from
the targeted station.
• “
STN FAIL
” is displayed if the targeted station does not send
back an acknowledgement.
u
After a specified time period has passed, the transceiver
will return to receive.
D
Transmitting a Revive Call
Revive call allows you to send MDC 1200 system signals that
will revive a stunned transceiver.
q
Push
[MDC Call]
to enter the MDC menu selection mode.
w
Push
[CH Up]
or
[CH Down]
to
select “
REVIVE
”.
R E V I V E
e
Push
[MDC Call]
again to enter the transceiver alias se-
lection mode.
r
Push
[CH Up]
or
[CH Down]
to
select the desired alias.
t
Push
[PTT]
to transmit the revive call to the selected sta-
tion.
• “
REV TX
” is displayed.
y
Release
[PTT]
.
• “
REV ACK
” is displayed if an aknowledgement is received from
the stunned station.
• “
REV FAIL
” is displayed if no acknowledgement is received from
the stunned station.
u
After a specified time period has passed, the transceiver
will return to receive.
