![background image](http://html1.mh-extra.com/html/icom/ic-f5060-series/ic-f5060-series_operating-manual_4283392040.webp)
37
5
IDAS OPERATION
D
Transmitting a Remote Monitor Call
A remote monitor call will send a signal that requires the tar-
geted station to transmit its microphone audio.
q
Push
[Digital Button]
to enter the application selection
mode.
• “
VOICE
” appears.
• To change the call type, hold down
[Digital Button]
for 1 second in
the standby mode. After changing, the transceiver automatically
enters the application selection mode.
w
Push
[CH Up]
or
[CH Down]
to select “
REM MON
.”
e
Push
[Digital Button]
again to enter the Individual ID se-
lection mode.
• A preprogrammed ID name is displayed.
• When an ID name is not programmed, an ID code is displayed.
• The primarily ID can be preset to display first.
This function is usable in transceivers whose revision number is
2.9 or later. Ask your dealer for details.
r
Push
[CH Up]
or
[CH Down]
to select the desired ID name
or ID code.
• Depending on the presetting, you may be able to directly input
the ID. (The optional HM-152T is required.) See page 43 for de-
tails.
R E M
M O N
S T A T I O N
1
The individual ID name is displayed.
t
Hold down
[PTT]
to transmit the Remote monitor call to
the selected station.
• “
REM TX
” is displayed.
y
Release
[PTT]
.
• “
REM ACK
” is displayed if an acknowledgement is received from
the targeted station.
• “
REM FAIL
” is displayed if no acknowledgement is received from
the targeted station.
u
After a specified time period has passed, your transceiver
will return to the standby mode.