39
5
IDAS OPERATION
D
Transmitting a Status Message
The transceiver can send a preprogrammed status mes-
sage.
There are 100 selectable status messages.
q
Push
[Digital Button]
to enter the application selection
mode.
• “
VOICE
” appears.
• To change the call type, hold down
[Digital Button]
for 1 second in
the standby mode. After changing, the transceiver automatically
enters the application selection mode.
w
Push
[CH Up]
or
[CH Down]
to select “
STATUS
.”
e
Push
[Digital Button]
again to enter the status message
selection mode.
• A preprogrammed status message is displayed.
r
Push
[CH Up]
or
[CH Down]
to select a desired mes-
sage.
S T A T U S
T X
S T A T U S
0 1
The status message is displayed.
t
Push
[Digital Button]
again to enter the Individual or Talk-
group ID selection mode.
• The preprogrammed ID name is displayed.
• When an ID name is not programmed, an ID code is displayed.
• The primarily ID can be preset to display first.
This function is usable in transceivers whose revision number is
2.9 or later. Ask your dealer for details.
y
Push
[CH Up]
or
[CH Down]
to select the desired ID name
or ID code.
• Depending on the presetting, you may be able to directly input the
ID. (The optional HM-152T is required.) See page 43 for details.
S T A T U S
S T A T I O N
1
The individual or Talkgroup ID name is displayed.
u
Push
[PTT]
to transmit the status message to the selected
station or talkgroup.
• “
STAT TX
” is displayed.
i
Release
[PTT]
.
• “
STAT OK
” is displayed if an acknowledgement is received from
the targeted station.
• “
STA FAIL
” is displayed if no acknowledgment is received from
the targeted station.
o
After a specified time period has passed, the transceiver
will return to receive.
Convenient!
(The optional HM-152T is required.)
Depending on the presetting, you may be able to use the
quick status message selection and transmission.
➥
Push the desired digit key ([1] to [9] or [0]) to enter the
status message selection mode.
• The appropriate status message is displayed.
➥
Hold down the desired digit key ([1] to [9] or [0]) for 1 sec-
ond to transmit the appropriate status message, 1 to 10.
