![background image](http://html1.mh-extra.com/html/icom/ic-f5060-series/ic-f5060-series_operating-manual_4283392014.webp)
11
2
BIIS 1200 OPERATION
■
Transmitting an SDM
D
General
The short data message, SDM, can be sent to an individual
station or group stations. Also, 8 SDM memory channels are
selectable and the messages can be edited on your PC.
D
Transmitting an SDM
q
While in the standby mode, push
[BIIS Button]
, then push
[CH Up]
or
[CH Down]
to select the desired station/group
code.
w
Push
[BIIS Button]
again, then push
[CH Up]
or
[CH Down]
to select the desired SDM.
• “
” appears.
M E S S A G E
1
S D M
1
SDM is displayed.
Appears
e
Push
[Call]
or
[PTT]
* to transmit the SDM to the selected
station/group.
* A PTT call can be made only when PTT call capability is permit-
ted.
• 2 beeps sound and the transceiver automatically returns to the
standby mode when transmission is successful.
D
Direct message input
The optional HM-152T is required for this operation.
q
While in the standby mode, push
[BIIS Button]
twice, then
push
[CH Up]
or
[CH Down]
to select the desired SDM to
be edited.
• “
” appears.
w
Push
[
M
]
or
[#]
to enter the message editing mode.
• The first character blinks when
[#]
is pushed; the last character
blinks when
[
M
]
is pushed.
• “
” blinks.
e
Push the appropriate digit key, [0] to [9], to enter the de-
sired character.
• See the table on page 12 for the selectable characters.
• Pushing
[CH Up]
also enters a space, pushing
[CH Down]
de-
letes the selected character.
r
Push
[#]
to move the cursor to the right, push
[
M
]
to move
the cursor to the left.
t
Repeat steps
e
and
r
to enter the desired text mes-
sage.
y
Push and hold
[BIIS Button]
for 1 second to write the set
message into the message memory.
• Push
[BIIS Button]
momentarily to cancel the editing and return
to the original message display.