![background image](http://html1.mh-extra.com/html/icom/ic-f5060-series/ic-f5060-series_operating-manual_4283392016.webp)
13
2
BIIS 1200 OPERATION
■
Printer connection
When a printer is connected to the D-sub 25-pin connector on
the transceiver, the received SDM content and the called sta-
tion ID can be printed out. Ask your dealer or system operator
for connection details.
■
BIIS ANI
Your own ID can be transmitted each time the PTT is pushed
(log-in) or released (log-off) with individual or group calls
communications.
When receiving an ANI, the communication log will be re-
corded when using a PC dispatch application.
In addition, when using the ANI with log-in, the PTT side tone
function can be used to inform you that the ID is sent and
voice communication can be made.
■
Transmitting an Emergency call
When
[Emergency]
(described in the instruction manual) is
held down for the specified time period, an emergency signal
(Status 22) is transmitted once or repeatedly* on the emer-
gency channel. When no emergency channel is specified, the
signal is transmitted on the operating channel.
* When the Repeat Cancel function is ON, the transceiver cancels
repeating after receiving an acknowledgement.
When the Repeat Cancel function is OFF, the transceiver repeats
calling according to the number of repeat cycles, even after receiv-
ing an acknowledgement.
This function is usable in transceivers whose revision number is 3.0
or later. Ask your dealer for details.
If you want to cancel the emergency call, hold down the key
again before transmitting the call.
The emergency call may be transmitted without a beep
sounding, and the LCD display, depending on the presetting.
(Silent operation)
The transceiver can also be programmed to keep the micro-
phone open during an emergency call, to allow monitoring of
the situation.
Ask your dealer for details.
IMPORTANT:
Setting a separate emergency channel to
provide reliable emergency call operation is recom-
mended.