3
2
BIIS 1200 OPERATION
■
Setting example
The following key functions are recommended to be assigned
to each programmable key for BIIS 1200 operation. The key
functions can be assigned by your dealer. Ask your dealer for
details.
NOTE:
During BIIS 1200 operation, the MDC 1200 sys-
tem, LTR
and IDAS operations are disabled.
[Call]
: Push to transmit a BIIS call when the
selected channel is an MSK channel.
[BIIS Button]
: Push to select the call list ID/transmit
message, or a displayed receive mes-
sage record.
•
The key indicator appears above the key that
this key function is assigned to, while it is acti-
vated. See the instruction manual for details.
[TX Code Enter]
: Push to directly enter the ID code
edit mode, then push
[CH Up]
or
[CH
Down]
to set the desired digit.
[Moni (Audi)]
: When your communication in the MSK
channel mode is finished, push this key
to send a ‘Clear down’ signal.
[CH Up]
/
[CH Down]
: While in the standby mode, push to se-
lect an operating channel.
After pushing
[BIIS Button]
or
[TX Code CH Enter]
, push to select a
call list or TX code digit, respectively.
■
Receiving a call
D
Individual call
q
When an individual call is received:
• Beeps sound.
• “
” appears and the mute is released.
• “
” appears or blinks, depending on the presetting.
• Your own ID (or text) and the calling station ID (or text) blink.
0 0 0 1
1 2 3 4
Appears or blinks
Appears
Your own ID Calling station ID
w
Hold down
[PTT]
, then speak into the microphone at your
normal voice level.
• The LED lights red.
e
Release
[PTT]
to return to receive.
• The LED indicator lights green while receiving a signal.
r
To end the call, push
[Moni(Audi)]
to send the ‘Clear
down’ signal.
• Either station can send a ‘Clear down’ signal.
• “
CLR DOWN
” is displayed for approximately 2 seconds.
• The “
” icon disappears and the transceiver returns to the
standby mode.
