36
5
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Transmitting a Revive Call
A Revive call will send a signal that will revive a stunned
transceiver.
q
Push
[Digital Button]
to enter the application selection mode.
• “
VOICE
” appears.
• To change the call type, hold down
[Digital Button]
for 1 second in
the standby mode. After changing, the transceiver automatically
enters the application selection mode.
w
Push
[CH Up]
or
[CH Down]
to select “
REVIVE
.”
e
Push
[Digital Button]
again to enter the Individual ID se-
lection mode.
• A preprogrammed ID name is displayed.
• When an ID name is not programmed, an ID code is displayed.
• The primarily ID can be preset to display first.
This function is usable in transceivers whose revision number is
2.9 or later. Ask your dealer for details.
r
Push
[CH Up]
or
[CH Down]
to select the desired ID name
or ID code.
• Depending on the presetting, you may be able to directly input
the ID. (The optional HM-152T is required.) See page 43 for de-
tails.
R E V I V E
S T A T I O N
1
The individual ID name is displayed.
t
Push
[PTT]
to transmit the Revive call to the selected station.
• “
REV TX
” is displayed.
y
Release
[PTT]
.
• “
REV ACK
” is displayed if an acknowledgement is received from
the targeted station.
• “
REV FAIL
” is displayed if no acknowledgement is received from
the targeted station.
u
After a specified time period has passed, your transceiver
will return to the standby mode.
