![background image](http://html1.mh-extra.com/html/icom/ic-f5060-series/ic-f5060-series_operating-manual_4283392004.webp)
1
1
PREPARATION
■
Programmable function keys
The following functions can be assigned to the
[UP]
,
[DOWN]
,
[P0]
,
[P1]
,
[P2]
,
[P3]
and
[P4]
programmable function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function.
D
For BIIS 1200 operation only
BIIS BUTTON KEY
➥
Push to toggle the call ID list, transmit message and stand-
by modes.
➥
Push to toggle between the queue channel and the received
message record display, after the queue channel is select-
ed.
➥
Hold down for 1 second to select the queue channel
mode.
STATUS UP/DOWN KEYS
➥
While in standby, push to display the transmit status screen
and select a status number.
➥
When a received SDM (Short Data Message) is displayed,
push to cancel the automatic scroll and then manually
scroll the message.
➥
When an SDM that contains more than 12 characters is
displayed, push to manually scroll the message.
D
For MDC 1200 system operation only
MDC CALL KEY
➥
Push to enter the MDC menu selection mode.
➥
Push
[CH Up]
or
[CH Down]
to select the desired
“
SELCALL
,” “
CALALERT
,” “
STUN
,” “
REVIVE
,”
“
RADIOCHK
,” “
STATUS
”, “
MSG
” and “
CALL LOG
” MDC
menu.
After selecting, push this key again to enter the transceiver
alias selection mode.
• If no operation is performed for approximately 15 seconds, the
transceiver returns to the normal operating mode.
➥
In the transceiver alias selection mode, push to return to the
MDC menu selection mode.
MDC SELCALL KEY
Push to enter the transceiver alias selection mode for a
SelCall.
• After selecting the desired alias, push
[PTT]
to transmit a SelCall.
• If no operation is performed for approximately 15 seconds, the trans-
ceiver returns to the normal operating mode.
MDC CALLALERT KEY
Push to enter the transceiver alias selection mode for a
CallAlert.
• After the desired alias selection, push
[PTT]
to transmit a Call
Alert.
• If no operation is performed for approximately 15 seconds, the trans-
ceiver returns to the normal operating mode.