![background image](http://html1.mh-extra.com/html/icom/ic-f5060-series/ic-f5060-series_operating-manual_4283392021.webp)
18
3
MDC 1200 SYSTEM OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Receiving a Message
q
When a Message is received
:
• Beeps sound.
• The calling station ID (or alias) and the message are alternately
displayed.
I D
1 2 3 4
M S G
1
w
Turn power OFF, push
[PTT]
, or change the channel to
stop the display indication.
D
Receiving a Status Message
➥
When a Status Message is received
:
• Beeps sound.
• The calling station ID (or alias) and the status message are dis-
played once.
I D
1 2 3 4
S T A T U S 1
D
Receiving a Stun or Revive
If a Stun command is received that matches your station
ID, the transceiver will display “SORRY” and you can not re-
ceive or transmit. When a Revive command is received that
matches your station ID, normal operation is restored.
D
Call log function
After receiving the SelCall, Call Alert and Emergency call,
the call logs may be displayed, depending on the presetting.
Up to 5 logs can be memorized, and the oldest log is erased
when a 6th call is received.
q
Push
[MDC Call]
to enter the MDC menu selection mode.
w
Push
[CH Up]
or
[CH Down]
to select
“
CALL LOG
”.
e
Push
[MDC Call]
again to display the call logs.
• When no call is received, an error beep sounds.
I D
1 2 3 4
S C
-
0 : 2 7
Calling station ID
Elapsed time after
receiving the call
: SelCall
: Call Alert
: Emergency call
Call type
SC
CA
EMG
r
Push
[CH Up]
or
[CH Down]
to select the desired call log
memory.
NOTE:
After
1000 hours has passed from when the call
was received, the elapsed time resets to 0:00.