![background image](http://html1.mh-extra.com/html/icom/ic-f5060-series/ic-f5060-series_operating-manual_4283392009.webp)
6
2
BIIS 1200 OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Transmitting a call
There are 3 ways to select a call code— selecting from mem-
ory, calling back from the queue channel record, and entering
from the keypad.
D
Using call memory
q
While in the standby mode, push
[BIIS Button]
to enter
the call code memory channel selection mode.
• “
” appears.
1 2 3 4
Appears
w
Push
[CH Up]
or
[CH Down]
to select the desired call
code.
e
Push
[Call]
or
[PTT]
* to call.
* A PTT call can be made only when PTT call capability is permit-
ted.
NOTE:
When no answer back is received, the trans-
ceiver automatically repeats the call 3 times (default),
and “
WAIT
” is displayed during each call. However, an
error beep sounds and “
FAILED
” is displayed when
no answer back is received after the repeated calls.
r
Push
[PTT]
to transmit; release to receive.
t
Push
[Moni (Audi)]
to send a ‘Clear down’ signal.
D
Calling back from the queue channel
q
While in the standby mode, push and hold
[BIIS Button]
for
1 second to enter the queue memory channel selection
mode.
< Q U E U E >
- Q U E U E ! -
w
Push
[Up]
or
[Down]
to select the desired record.
0 0 0 1
1 2 3 4
e
Push
[Call]
or
[PTT]
* to call.
* A PTT call can be made only when PTT call capability is permit-
ted.
NOTE:
When no answer back is received, the trans-
ceiver automatically repeats the call 3 times (default),
and “
WAIT
” is displayed during each call. However, an
error beep sounds and “
FAILED
” is displayed when
no answer back is received after the repeated calls.
r
Push
[PTT]
to transmit; release to receive.
t
Push
[Moni (Audi)]
to send a ‘Clear down’ signal.