![background image](http://html2.mh-extra.com/html/icom/d-star-id-31a-d-star-id-31e/d-star-id-31a-d-star-id-31e_advanced-instructions_3494369026.webp)
3
DR MODE <BASIC>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3-9
The transceiver searches for the nearest repeater by
using your own and repeater’s position data.
Example:
Select the “Hirano430” repeater that is the
top search result.
1. Receiving your own position data from the GPS
receiver
When it is difficult to receive signals indoors, even if
you are near a window, try going outdoors for better
reception.
Push [MENU]
q
.
To display the GPS SELECT screen, push
w
D-pad(
) to select the root item (“GPS”), and then
push D-pad(Ent) to go to the next level.
Repeat step
e
w
until the desired item is selected.
Push D-pad(
r
) to select “Internal GPS.”
• The transceiver starts to receive your position data.
Push [MENU]
t
to save and exit the MENU
screen.
• When invalid data is received, the GPS indicator blinks,
as shown below.
➪
➪
➪
• The GPS indicator fully appears when valid position data
is received.
• Depending on your environment, it may take time to re
-
ceive position data.
D
“FROM” (Access repeater) setting using the Repeater Search function
☞
Continued on the next page.
Appears
To display your position data:
Push
q
.
Push D-pad(
w
) to select "GPS Position," and then
push D-pad(Ent).
• Your position data is displayed on the GPS POSITION
screen.
Push [CLR]
e
to exit the GPS POSITION
screen.
D-pad
(
�
)
(Ent)
Previous view